User's Manual

cable to the headset.
1. Connect the charger to a wall outlet. The red indicator light is displayed
during charging. If charging does not start, disconnect the charger, pug
it again, and retry. Charging the battery fully may take up to 2 hours.
2. When the battery is fully charged, the red indicator light turns off.
Disconnect the charger from the wall outlet and the headset.
The fully charged battery has power for up to 4 hours of talk-time or up to
200 hours of standby time. However, the talk and standby times may vary
when used with different mobile phones, products that use a Bluetooth
connection, usage settings, usage styles, and environments.
When the battery is running out of power, the red indicator light starts to
flash.
Switch the headset on or off
To switch on, press and hold the power key for 3 seconds. The blue
indicator light starts to flash.
To switch off, press and hold the power key for 4 seconds until headset
beeps 2 times and the red indicator light is displayed briefly.
Pair the headset with a compatible phone
1. make sure your headset is turn off
2. push the answer key for 8 second until the blue and red light flashes