User Guide
Table Of Contents
- User manual draft (01)
- User manual draft (02)
- User manual draft (03)
- User manual draft (04)
- User manual draft (05)
- User manual draft (06)
- User manual draft (07)
- User manual draft (08)
- User manual draft (09)
- User manual draft (10)
- User manual draft (11)
- User manual draft (12)
- User manual draft (13)
- User manual draft (14)
- User manual draft (15)
- User manual draft (16)
Page 5
Using Camera Application on Your Windows 10 Computer
Camera application - Allows you to preview the webcam image, capture still frames and
video clips.
- Select the Start button
- Select ‘Camera’ from the list of applications
After you open the Camera app:
- Select Photo or Video , then select it again to take a picture or start a video. If you
are making a video, select Video again to finish recording.
- To see your new photo or video, or ones you've taken before
- Select the Start button
- Select ‘Photos’ from the list of applications
Note:
If you are using a laptop with an integrated camera or have a second camera installed, you
will need to change the camera selected in the app so that the CA Essential Webcam
1080HD-AF is selected.
- To select between cameras select the camera icon with the circular arrow in the top right
corner of the application. Selecting the icon will switch between installed cameras.
- If only one camera is installed on your Windows computer, the camera icon with the
circular arrow will not be displayed.