User Guide

Fixing Video Flickering
Video flickering can be fixed by following the recommended settings:
- The Flicker Control setting is preset at 60Hz.
- When traveling to another country where the powerline frequency is 50Hz, you may find that
the video is flickering. This will require switching the Flicker Control to 50Hz.
- When returning back to your home country, switch the Flicker Control back to 60Hz.
There are two ways to stop your video from flickering:
- Utilize a 3rd Party application called AMCap
(see instructions below)
- Change through the settings of your Video Messaging
application (see instructions on page 9)
AMCap:
- Download & install AMCap Demo version from
https://amcap.en.softonic.com/download?ex=NB-6.2
- Launch AMCap
- Select Options --> Video Device -->Properties
- Select appropriate Flicker Control to 50Hz or 60Hz in
Light Source row.
Page 8