Owner Manual

42339 rev A 11-06-19
10
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370,
6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and
domestic applied for and pending. All material copyright of Balboa Water Group.
Adjusting Filtration
Sets Filter 1 length in hours
Sets start hour Shows/flashes minutes
Shows/flashes minutes
Sets 15-minute incrementsShows/flashes start time
Sub-Menu Detail – Set Filter Cycle 1
to show RUN HRS
to show F1 ENDS xx:xx
Sets 15-minute increments
Press Menu/Select
repeatedly until FLTR 1
appears in the LCD.
Main Screen
Main Screen
Sets Filter 1 length in hours
Sets start hour Shows/flashes minutes
Shows/flashes minutes
Sets 15-minute incrementsShows/flashes start time
to show RUN HRS
to show F2 ENDS xx:xx
Sets 15-minute increments
Main Screen
To next item in
Main Menu
Main Screen
To Set
To Set
To Set
To Set
To Set
Waiting
a few seconds
reverts to original setting
Waiting
a few seconds
reverts to original setting
Wait to
Revert
*****
Waiting
a few seconds
reverts to original setting
*****
Waiting a few seconds
will lose any new Filter 1
Start Time and Run Hours and
revert to the previous Filter 1 settings.
*****
To Set
Waiting a few seconds
will lose any new Filter 2 On/OFF,
Start Time and Run Hours and
revert to any previous Filter 2 settings.
*****
*****
Wait to
Revert
*****
*****
2X
2X
BEGN OO 8 OO 9 OO 9 9
RUN HR5 OO 3 OO 3 3O 3
END5
OO 9 OO 9 9
RUN HR5 OO 3
00
OO 3 3O 3
END5
ON
BEGN
OO 8
45
45
Main Filtration
Filter cycles are set using a start time and a duration. Start time is indicated by an “A” or “P” in the bottom right corner of
the display. Duration has no “A” or “P” indication. Each setting can be adjusted in 15-minute increments. The panel calcu-
lates the end time and displays it automatically.
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Menu/Select button
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
It is possible to overlap Filter Cycle 1 and Filter
Cycle 2, which will shorten overall filtration by the
overlap amount.
Purge Cycles
In order to maintain sanitary conditions, secondary Pumps and/
or a Blower will purge water from their respective plumbing by
running briefly at the beginning of each filter cycle.
If Filter Cycle 1 is set for 24 hours, enabling Filter Cycle 2 will
initiate a purge when Filter Cycle 2 is programmed to begin.