Owner Manual
Hot Tub Maintenance
To keep clean, a hot tub needs weekly spa maintenance which is required to protect
your hot tub pump and parts as well as the cleanliness of the water. And every three
months a through hot tub maintenance is recommended. In addition, the water level and
filtering in your spa will also affect the hot tub maintenance requirements.
This guide to spa maintenance will provide you with the information you need to carry
out your basic hot tub maintenance yourself. In this way, the water will remain cleaner
longer and your hot tub pump and parts will live longer. For the most part, only a few
minutes investment at a time will be required for your hot tub maintenance, ensuring
you the luxury of a home spa year round.
Before Your Hot Tub Maintenance
Assuming that your hot tub is going to be cleaned and filled for the first time, there are a
few spa maintenance tricks that will make the job easier. To begin with, after cleaning
your hot tub, be sure to wipe off any soap residue with wet paper towels or a wet cloth.
This will prevent the water in your hot tub foaming up after it is filled, which is harmful to
your hot tub pump and can become a real nuisance when the foam rises too high. In
fact, bad cases of foam may require you to empty your hot tub and start your spa
maintenance over again, or use large amounts of foam reducer on a regular basis.
When filling your hot tub, be sure to bring the water level to the just above the halfway
opening of the skimmer. We do not recommend using softened water of any kind for
filling the spa due to the difficulty it causes in balancing your water, and possible
corrosion issues to the heater. If during spa maintenance you fill the tub too low, the hot
tub pump will disengage as a safety measure or you will hear air cavitating down
through the skimmer throat. The spa will then stop heating and circulating and may
appear to be broken. Therefore, make checking the water level in your hot tub a routine
part of your spa maintenance.