Installation Instructions

Contractors Wardrobe
®
, 26121 Avenue Hall, Valencia, CA 91355 | Phone: [phone] Fax: [phone] | CwDoors.com
Surfliner
™
-PRIN-2820-0620
7
Figure 7
Right Wall
Mount
Bracket (#12)
Right
Wall Jamb
(#2R)
#8 1-1/2”
flat head
plain screw
(#7)
Step 6 Installing the Header
A. Using the tape measure, measure the width
from inside the Right and Left Wall Mount Brackets.
B. Locate the Header. Using the miter box and
hacksaw cut the header to the length you just
measured.
C. Insert the Header into the Wall Mount Brackets.
D. Reattach the Latches on the Wall Mount
Brackets with the #10-32 Hex FH Screws. Using the
Hex Key, tighten the screws on each Wall Mount
Bracket (See Figure 8).
Figure 8
Right Wall
Mount Latch
(#12a)
Hex Key
Figure 8a
Hex Key
)52179,(:
6&$/(
6,'(9,(:
6&$/(
7239,(:
6&$/(
%$&.9,(:
6&$/(
LVR
6&$/(
6+((72)
':*12
:DOO0RXQW/HIW+DWFK
7,7/(
352326(':$//02817
/()7+$7&+
6,=(
%
6&$/(
&Z
5(9

$9(18(+$//
9$/(1&,$&$
7(/
)$;
02'(/
E. Tighten the small screw on the bottom of
each Wall Mount Bracket using the Hex Key
(See Figure 8a).