Installation Instructions

Contractors Wardrobe
®
, 26121 Avenue Hall, Valencia, CA 91355 | Phone: 661.257.1177 Fax: 661.257.4907 | CwDoors.com
Surfliner
-PRIN-2820-0620
6
B. Place Right Wall Mount Bracket on top of the
right Wall Jamb. Use pencil to mark the location
of the two holes (See Figure 6). Set the Wall Mount
Bracket aside fo the moment.
C. Using either a 1/8” drill bit (for a fiberglass
enclosure) or a 3/16” masonry drill bit (for tile) drill
three holes where you made the marks. If installing
in a tiled enclosure, gently tap a Screw Anchor into
each hole. DO NOT use the Screw Anchors for a
fiberglass enclosure.
D. Place Right Wall Mount Bracket back on top of
Right Wall Jamb and secure with #8 x 1 1/2” PH
SMS Screws (See Figure 7).
E. Repeat Steps 5, A-D for left Wall Mount Bracket.
Step 5 Installing the Wall Mount Brackets
Right Wall
Mount
Bracket (#12)
A. Remove the Latch from Wall Mount Bracket
(See Figure 5).
Figure 5
Right Wall
Mount Bracket
Latch (#12a)
Step 4 Installing the
Panel Locator/Bumper
See Figure 4 to position the Panel Locators. Secure
with #8 x 1-1/2” PH SMS Screws.
)52179,(:
6&$/(
6,'(9,(:
6&$/(
7239,(:
6&$/(
%$&.9,(:
6&$/(
LVR
6&$/(
6+((72)
':*12
:DOO0RXQW/HIW+DWFK
7,7/(
352326(':$//02817
/()7+$7&+
6,=(
%
6&$/(
&Z
5(9
$9(18(+$//
9$/(1&,$&$
7(/
)$;
02'(/
Right Wall
Bracket (#12)
Right
Wall Jamb
(#2R)
Figure 6
Panel Locator/
Bumper (#5)
Left
Wall Jamb
(#2L)
Panel Locator/
Bumper (#5)
Panel Locator/
Bumper (#5)
Panel Locator/
Bumper (#5)
Right
Wall Jamb
(#2R)
Figure 4