Installation Instructions

Contractors Wardrobe
®
, 26121 Avenue Hall, Valencia, CA 91355 | Phone: [phone] Fax: [phone] | CwDoors.com
Surfliner
™
-PRIN-2820-0620
3
NO. QTY. PART # PART DESCRIPTION
Header Assembly
1 1 ALUM-7730* Header
2L 1 ALUM-7750* Left Wall Jamb (stamped “L”)
2R 1 Right Wall Jamb (stamped “R”)
3 1 ALUM-7760* Curb
4 1 VINY-1185CL* Clear Panel Glide Strip
(pre-installed)
5 4 HARD-2045 Panel Locator/Bumper
6 8 FAST-1365* #8 x 1-1/2” PH SMS Screw
7 2 FAST-1250* #8 x 1-1/2” FH SMS Screw
8 10 FAST-1440 Screw Anchor
9 Inside Panel Hanger Assembly
9a 2 HARD-3030* Inside Panel Hanger Bracket
9b 4 HARD-2065BL Wheel, Ball Bearing
9c 4 #8-32 x 1/2” HFH Screw
9d 2 HARD-3035* Inside Panel Anti-jump
10 2 HARD-2085* Outside Panel Hanger
Assembly (pre-assembled)
10a 2 Outside Panel Bracket
10b 2 Outside Panel 44mm Wheel
10c 2 HARD-3000*
Outside Panel Anti-Jump/
Soft Close Catch
10d #8-32 x 1/2” HFH Screw
aa 4 #10-32 x 3/4” HFH Screw
bb 4 HARD-3005* Adjustable Cam
cc 8** HARD-3010 1/4” (6mm) Gasket
HARD-3015
5/16” (8mm) Gasket
HARD-3020
3/8” (10mm) Gasket
dd 4 HARD-3025 Cam Bushing
11 1 HARD-3055* Left Wall Mount Bracket
11a 1 HARD-3050*
Left Wall Mount Latch
12 1 HARD-3045* Right Wall Mount Bracket
12a 1 HARD-3040*
Right Wall Mount Latch
ee 2 Screw
ff 2 Screw
13 4 HARD-2040 Soft Close
(optional upgrade)
Glass
14 1 Outside Door Panel
15 1 Inside Door Panel
16 1** HARD-2000* 1/4” (6mm) Center Guide
HARD-2005* 5/16” (8mm) Center Guide
Hardware
17 1** TBC-SLN3-20SK* Solana Towel Bar Combo
(shown)
TBC-VCT5-20BK* Victoria Towel Bar Combo
TBC-CTN3-20BK* Canton Towel Bar Combo
*When reordering the part please indicate the SIZE and/or FINISH
**Based on your selection
Congratulations on purchasing your new Cw
®
tub/
shower enclosure. Now that you have opened the
package, we want you to verify that you have all the
necessary hardware supplied with your enclosure.
Please read and understand these instructions in their
entirety prior to assembly, installation and operation.
Use a level to check that the tub/shower sill is
reasonably level – not more than 1/8” out of level from
side to side. If the sill is out of level more than 1/8”,
you will need to order a custom-mitered filler that fits
under the Curb. This will level the Curb correctly. In the
absence of leveling the Curb with a mitered filler, and
depending upon the out of level amount, the Panels
may not stay in a closed or open position.
Use a level to check that the walls of the enclosure are
plumb – not more than 3/8” out of plumb. If the walls
are out of plumb by more than 3/8”, you will need
to order a custom-mitered filler that fits behind the
Wall Jamb. In the absence of a plumb Wall Jamb, and
depending upon the out of plumb amount, the Panels
may not close correctly.
To order custom-mitered filler for your Curb or Wall
Jamb, please contact customer service at your point
of purchase.
Before beginning assembly of the product, make sure
all parts are present. Compare parts with the checklist
and package contents list. If any parts are missing or
damaged, do not attempt to assemble the product.
Contact our Customer Service department with
any questions or concerns you may have about this
produ ct at 6 61. 257.1177.
KEEP THE CORNER PROTECTORS
ON THE GLASS DURING
INSTALL ATION
Parts list