Installation Instructions

Contractors Wardrobe
®
, 26121 Avenue Hall, Valencia, CA 91355 | Phone: [phone] Fax: [phone] | CwDoors.com
Model 750-PRIN-1280-0220
9
Thank you for making Cw
®
a part of your home.
For additional inspiration and to learn more
about our extensive line of products, we invite
you to visit our website at CwDoors.com.
The enclosure Door Panels are not designed to
be removed once they are installed. However,
inconvenient areas that you may want to clean,
such as the overlap between the doors, can still be
reached for cleaning.
A. Carefully remove all the hardware from door.
This will enable you to slide the glass Door Panels
in either direction to clean them thoroughly.
B. Clean the glass and Curb with a mild, non-
abrasive cleaner.
C. Re-install the hardware when you are finished.
CAUTION: Removing one or both of the Door Panels
should NOT be attempted without assistance.
Always wear safety goggles and gloves when
handling the glass Door Panels. Read through the
following instructions first to familiarize yourself
before proceeding.
D. Carefully remove any Silicone from around the
Header.
E. Remove the #6 x 1/4” “B”-Point Screw from
the Header. Slide both Door Panels to one side and
have someone assist you by supporting the Door
Panels.
F. You should now be able to raise the Header
enough to lift the Door Panels out of the Guide and
disengage them from the Header.
G. To re-install the Door Panels, reverse the
process described above: hang the Door Panels
in the Header and re-attach the Header onto the
Wall Jambs with two #6 x 1/4” “B”-Point Screws.
Re-install the hardware.
Step 14 Cleaning and Removing the
Door Panels