Manual

15. One barrel is now loaded.
16. Switch the “reminder” wad to the loaded barrel.
17. Repeat Steps 2 through 15 of the Loading Sequence and those of this
section to load the second barrel.
18. Dispose of the “reminder” wad.
19. Refer to the Loading Sequence for the remaining Steps 14 through 17.
FOR SINGLE PROJECTILE
Continuation of Steps 1 through 9 of the Loading Sequence, as previ-
ously listed.
10. Insert a “reminder” wad partially into the muzzle of the barrel NOT be-
ing loaded.
11. Center a well lubricated cloth patch over the bore.
12. Press round ball with sprue (or flat portion)
facing upward on lubricated patch.
(See page 13 for ball size.)
a. With “starter” end of ball seater, press
patched ball just into muzzle.
CAUTION: Do not use any type of independent
wad or plastic wad when loading the single ball
projectile.
26