Manual

3. Chosen volumetric shot pellet charge

4. One over-shot wad

6. Buckshot wads

a. There are two types of wads which can be used with buckshot.

1. Independent wads with larger size buckshot, such as #0, #00 and

#000 will give generally better pattern performance.

2. One-piece plastic wad with smaller buckshot size pellets, such as

#1, #2, #3 and #4. Do not use a one-piece plastic wad with #0,

#00, or #000 buckshot. To do so will result in poor pattern

performance.

7. Single Projectile Wad

a. Surround the .690 round ball with a lubricated cloth patch of suffi-

cient thickness to create a gasket seal.

b. No wad is used with the .690 round ball. Use of any form of wad will

decrease efficiency and could result in excessive pressure.

CAUTION: Do not substitute an independent over-powder wad for

the over-shot wad. Do not substitute a filler wad for an over-shot

wad. Do not use a cloth patch, loose cloth or loose paper as a sub-

stitute for an over-shot wad.