" NEW RUNTIER M FREELOADING In-Line Rifle Warranty Information This book contains information critical to the safe use and maintenance of New Frontier outstanding reams. YOU MUST HEAD THIS MATERIAL ENTIRELY w AHD FULLY UNDERSTAND THIS INFORMATION BEFORE YOU GAN SAFELY it 2y questions.
dole No. o Arsenal. Caliber _ Date Purchased — Type of Gun Warranty Information WARNING IF HANDLED IMPROPERLY FIREARMS ARE DANGEROUS.
P CONICAL BULLETS—Conical bullets provide acceptability accuracy in New Frontier Muzzle loaders as well as increased knock down power desired by hunters, These projectiles are best suited for use in barrels with medium to fast wist rifling which sensitize the bullet more rapidly. (FIGURE 1-8) 3. SABOT ED sabots from vacuous manufacturers have been tested and provide acceptable accuracy in New Frontier Masqueraders when complying with the sabot manufacturer's recommendations for usage.
4. LOADING AND SHOOTING HEW FRONTIER IN-LINE MUZZLE LOADERS 1. Wear shatterproof shooting gasses and ear pigs or muftis 1o protect yourself! fore sparks, bits of fragmented caps, and hearing loss. 2. Very the rife is not loaned. & Place ramrod down the barter 1o breech pig and mark ramrod at the muzzle. NOTE: The Bear Tooth Magnum has an extendable ramrod that must be In the extended position for this step. (Sec. Q1 Sep 8 b. Freeman ramrod and lay along outside of barrel, lining up mark at muzzle. .
receiver. Thi a. quake sure bullet is lubricated. PowerBelt™ Bullets and sabotaged bullets do not require additional lubrication, b. Start the projectile into the bore with your fingers, making sure centered. ¢ Use short end of bu list starter fo prods bullet jus Figure 4). 12. Use longer end of ball starter 1o move projectile about six inches down the bore. (Ses Figure B). 15 With ramrod, push projectile down on top of powder, firmly, but without crushing the powder or pellets, IMPORTANT.
T4 WITH GUN POINTED b SAFE DIRECTION and ding mechanism open, place a 208 primer inch the squamous plug. I using percussion caps, n aoe the cap note the nipple, THE GUN I8 NOW LADED {Ses Figure 8). at target 2nd 1o ease ,?m safely | cook hammer on Bear Too Lmflm_ 1o numb cut prior o & couture, wall &t feast one minute wi fury pointed at the tasting. & Make sure the bullet is seated on the motorway primer or percussion cap fire. which Is not Firmly seated against powder charge.
w2 PERCUSSION CAP IGNITION SYSTEM An optional ignition system is available for Wind River and Cascade owners hunting in areas where the #208 shotgun primer is prohibited by law. A new breech plug and isle combination is substituted for the standard 208 preschool with o other changes required. This conversion adapts the rifle for tell able ignition: using $11 percussion caps or musk: caps. Contact New Frontier Customer Service at 770-848-4687 to order. L.
1}, pule the boll assembly rearward, as per arrow “B”. The entire bolt assembly will now pull free from the receiver (Figure 10}, Figures 31 OF BOLT 1. With the Bali Assembly in the cocked position, align the boll assembly In the same position as when removed ure 14, Using the thumb, push forward on the Bolt Cap, past the initial resistance, until the Bolt Assembler stops (Figure 17). Cybele the Bolt Handle up, as per arrow “C7. Then forward, as per ar row "D (Figure 12}, ™ 0.
2 Using the alien wrench provided, unscrew the bolt cap by muting counterclockwise, The spring, striker, bot handle, and bot body now come span (Figure 13} 4. Clean all bolt parts thoroughly, dry all parts, then lubricate with & petroleum hasted gun ofl. 5. Reassemble bol busy. bolt handle, stoker, and spring (Figure 4} & Wove bolt to the uncorked position 7. Place the Holt cap bag over the spring. While pressing the aping downward, screw the bolt cap on to the bolt body. (See Figure 15 8.
physical injury or property damage resulting from intentional or accidental discharge, of the function of any gun subject fo influences beyond our control. We will honor no claim which was the result of careless or e proper handing, unauthorized adjustment, unauthorized modification of rummage improper loading, use of improper powder or components, cor=IO O neglect. Far your protection, examine this firearm carefully at the tme of supposition; exists contact New Frontier Muzzle lo by.
5. Enclose the total recall price of the item plus postbags and handling. Refer 1o the chart o determine this. 6. Please allow four to six weeks from receipt of order for delivery. POSTAGE & HANDLING CHART Orders Totaling: Add UNTO 820,00 §3.50 $20.01 $30. S30.01 §50.00 £50.01 $80.00 810,00 $B0.01 $110.00 $15.00 $110.01 §200.00 $20.00 $200.07 $500.00 OVER $500.00 . L $30.00 Georgia residents must add 6% sales tax.
