Owner’s Manual
• Insert a strong pin, small Allen wrench or punch (a paper clip will not
work here!) into the area shown
• Unscrew the ring pin assembly by turning the bolt shroud
counterclockwise and remove the ring pin assembly from the bolt.
Further disassembly is not recommended.
• Lubricate the bolt shroud threads and assemble in reverse order.
• The ring pin should sit at the top of the bolt cam notch as shown when
complete.
11. If you have removed the stock while cleaning your rie, tighten the retaining
screws to
50 to 55 inch-pounds of torque during reassembly.
12. Insert the bolt into the receiver, close the bolt, and check the function of the
trigger and safety. If you detect anything that is not as it should be, contact
CVA customer Service immediately.
13. REPAIR AND SERVICE
In the case that your CVA Cascade™ rie needs repair or service we recommend that
you return it postage paid to our facility. This will assure that your rie is worked on by
trained, qualied gunsmiths who are familiar with all CVA rearms. We do not have
approved gunsmiths outside our facilities and will not warrant the work of others.
You should rst contact CVA Customer Service by phone or through our web site to
initiate the repair process. The Return Number and Return Authorization will be sent
to you by email. Pack your rie carefully with a copy of the Return Authorization and
send postage-paid to the repair facility in your country.