User guide

Enclosure User Guide
68
Caution Ensure that the carriers are fully engaged in the enclosure, as shown in Figure 4–19.
Figure 4–19Engaging a Drive Carrier Module in an Enclosure
4.14.4 Dummy Drive Carrier Module Removal/Replacement
Dummy drive carrier modules are removed and replaced in the enclosure simply by pulling the module
out of the enclosure or pushing it into place.
4.15 Spare Parts and Ancillary Items
The following replaceable parts are available for FC60SS SAS Enclosure Platform:
• Chassis including Backplane and integrated Ops Panel
• 350W AC Power Supply Module • Cables:
• Drive Carrier Module – LC - LC optical cables (500m length)
• FC60SS RAID Module (512Mb DDR2 SDRAM) – RS232 cable
• FC60SS RAID Module (1024Mb DDR2 SDRAM) – LAN cable
• Cooling Module – SAS cables
• Battery Module – SATA cables
• Dummy Drive Carrier Module – External FC-AL Interface Cables
• Blank I/O Module (FC60SS/Expansion) • Power Cords (Country specific)
• Disk I/O Module • All documentation
• SFP module, optical • Keys, Anti-tamper Lock (for Drive Carrier
modules).