User guide

Figure 4–17 Drive Carrier Module with Handle Released
Troubleshooting
67
Note: If the anti-tamper locks have been activated, please refer to section 2.10.3, ”Engaging the
Anti-tamper Locks”, on page 34
2 Slide the carrier, gently, all the way into the enclosure until it is stopped by the camming lever on the right
of the carrier (
Figure 4–18)
Figure 4–18 Installing a Drive Carrier Module (step 2)
3 Cam the carrier home - the camming foot on the base of the carrier will engage into a slot in the enclosure.
Continue to push firmly until the handle fully engages. A click should be heard as the latch engages and
holds the handle closed (Figure 4–15).