User guide

Troubleshooting
63
3 Cam the module home by manually closing the latches (see Figure 4–12).
Figure 4–12 Installing a FC60SS RAID Module (step 2)
4 A click should be heard as the latches engage.
Note The FC60SS RAID module will take up to 1 minute to re-initialize onto the loop after re-cabling.
4.12 Battery Module
Warning There is a danger of explosion if the battery is incorrectly replaced.
Dispose of used batteries in accordance with the manufacturer’s instructions and national regulations.
4.12.1 Removing a Battery Module
1 Operate the release latch and slide the Battery module out of the FC60SS RAID module (Figure 4–13).