User guide

Troubleshooting
51
4.2.4 FC60SS RAID Module LEDs
The FC60SS RAID module incorporates the following LED indicators: For details on how to remove and
replace a FC60SS RAID module see Section
4.11.
Table 4–4 FC60SS RAID Module LEDs
LED Functions LED State Definition
Controller Slot 0 Activity* Amber When ON the Controller is currently processing data
Controller Slot 1 Activity* Amber When ON the Controller is currently processing data
Controller OK Green Module OK
Controller Fault Amber Fault on this module
Cache Active Amber Active cache contents
Battery/Controller Fail Amber Fault in battery or charger operation of controller
Host 0 Port Signal Good Green When ON the LED denotes that incoming FC signal
is good
Host 1 Port Signal Good Green When ON the LED denotes that incoming FC signal
is good
Host 0 Port Traffic* Amber When ON the Controller is processing data on this
port
Host 1 Port Traffic* Amber When ON the Controller is processing data on this
port
SAS Expansion 1* Green When ON this port is active
SAS Expansion 2* Green When ON this port is active
SAS Expansion 3* Green When ON this port is active
SAS Expansion 4* Green When ON this port is active
* These LEDs blink on/off when there is module activity.
4.2.5 Disk I/O Module LEDs
Table 4–5 Disk I/O Module LEDs
LED Functions State Description
Host 0 & Host 1
(Green)
ON
Flashing
OFF
Ready
Active
Not Ready
Expansion
(Green)
ON
Flashing
OFF
Ready
Active
Not Ready