User guide

Enclosure User Guide
44
3.6 FC60SS RAID Module LEDs
The FC60SS RAID module LEDs status conditions are defined in Table 3–4.
Table 3–4 FC600SS RAID Module LEDs
LED Functions LED State Definition
Controller Slot 0 Activity* Amber When ON the Controller is currently
processing data
Controller Slot 1 Activity* Amber When ON the Controller is currently
processing data
Controller OK Green Module OK
Controller Fault Amber Fault on this module
Cache Active Amber Active cache contents
Battery/Controller Fail Amber Fault in battery or charger operation of
controller
Host 0 Port Signal Good Green When ON the LED denotes that incoming
FC signal is good
Host 1 Port Signal Good Green When ON the LED denotes that incoming
FC signal is good
Host 0 Port Traffic* Amber When ON the Controller is processing data
on this port
Host 1 Port Traffic* Amber When ON the Controller is processing data
on this port
SAS Expansion 1* Green When ON this port is active
SAS Expansion 2* Green When ON this port is active
SAS Expansion 3* Green When ON this port is active
SAS Expansion 4* Green When ON this port is active
* These LEDs blink on/off when there is module activity.