User guide

Figure 2–16 Cable Strain Relief Bales
Enclosure User Guide
36
2 Attach the power cord to the Power Distribution Unit (Figure 2–17) in the rack or other power source.
Figure 2–17Power Cord Connections
Warning Before applying power, carry out the grounding checks detailed in section 2.12.
3 A Power On LED on the Ops Panel indicates whether AC power is present.
Caution The power connections must always be disconnected prior to removal of the Power Supply module from
the enclosure.
2.12 Grounding Checks
Perform these checks to ensure that a safe grounding system is provided.
• If a Rack Distribution System is being used.
– Ensure power is removed from the rack.
– Connect the FC60SS power cord to the rack distribution and the enclosure.
• If a direct connection is made with the FC60SS power cord, ensure that it is connected
to the enclosure.