User guide

Getting Started

The rack mounting rail kit also incorporates a rear hold down mechanism to ensure shock and vibration

immunity.

Please contact your supplier to ensure suitable mount rails are available for the rack you are using.

Figure 2–3 Rack Mounting Rail Kit

(Left hand assembly shown)

Latch

(both sides)

2.3.4 Rack Installation Procedure

Please refer to the detail drawings supplied with the rack mounting rail kit for further information

2.3.4.1 Parts Check List

Rack Mounting Rail Kit

2.3.4.2 Installation Procedure

1 Attache left and right chassis slides to the enclosure sides using 8 M3x4 button head screws (see Figure

2–4).

2 assemble the left and right chassis latches using the special chassis latch screws. Ensure that the latch

is orientated as shown in

Figure 2–4, with the spring arm located against its stop.On the right hand this

is at the top, on the left it is at the bottom.