User guide

Enclosure User Guide
6
1.4 The Plug-in Modules
An FC60SS enclosure requires the following modules for normal operation:
• 2 x 350W AC Power Supply modules
• 1 x Cooling module
• FC60SS: 1 or 2 x FC60SS RAID modules
• FC60SS: 2 x Disk I/O modules
• Up to 12 Drive Carrier modules.
• Dummy Carrier modules, as required.
Note: No bays should be left completely empty, Dummy Carrier modules and/or blank modules
must be fitted in all unused bays.
1.4.1 AC Power Supply Module
Two 100-240 V AC 350W Power Supply modules (Figure 1–7) are supplied mounted in the rear of the
enclosure as part of the enclosure core product.
Figure 1–7 AC Power Supply Module
.
PSU voltage operating ranges are nominally 115V or 230V AC, selected automatically.
.
Two LEDs mounted on the rear panel of the Power Supply module (see Figure 1–7) indicate the status
of the module: