User guide

Enclosure User Guide
x
PSU Warning Label: Power Hazards
• The power connection should always be disconnected prior to removal of the Power Supply module
from the enclosure.
• A safe electrical earth connection must be provided to the power cords. Check the grounding of the
enclosure before applying power.
• Provide a suitable power source with electrical overload protection to meet the requirements laid
down in the technical specification.
Warning Do not remove covers from the Power Supply module. Danger of electric shock inside. Return the
Power Supply module to your supplier for repair.
PSU Safety Label: Electric Shock Hazard Inside
Caution If this equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Battery Safety
The Li-Ion battery is user replaceable, please refer to section 4.12, ”Battery Module”, on page 63.
Warning There is a danger of explosion if the battery is incorrectly replaced.
Dispose of used batteries in accordance with the manufacturer’s instructions and national regulations.
Expansion Connectors
Important Class 1 Laser Product:
If fitted with Optical modules, the modules must be a UL (or other North American NRTL)
RECOGNISED COMPONENT and must be approved by TUV (or other European product safety
test house) and the laser in the module must comply with Laser Class 1, US 21 CFR (J) and EN
60825-1.