Specifications

21/CUTTERS EDGE FIRE RESCUE SAWS
CUTTERS EDGE FIRE RESCUE SAW SPECIFICATIONS..MODEL #CE-2171-RS
ENGINE CUTTING CHAIN
TYPE: Single-cylinder 2-cycle, with loop scavenging STYLE: CUTTERS EDGE BULLET
®
CHAIN
DISPLACEMENT: 4.3 cu.in. (70.7cc) TYPE: Carbide Tipped with “Locking Key”
BORE: 1.97 in. (50mm) and Solid Bullet Raker Gauge
STROKE: 1.4 in (36mm) DESIGN: Patented Fire Rescue Design…U.S. Patent No. 5,056,395
COMPRESSION
RATIO: 10.2:1 SIZE: .404”Pitch x .063” Gauge
BEARINGS: Heavy-duty deep-groove ball bearings on with .068 “Drive Links (coined to .063”)
crankshaft, needle cage bearings on Heavy Duty Tie Straps, Tempered Rivets and .068”Hubs
connecting rod, piston pin and clutch CERTIFICATION: Meets or exceeds ANSI and OSHA standards
CYLINDER/PISTON: Closed ported, dual rings with four transfer ports Certified according to ISO 9518 Standards as
CYLINDER MATERIAL:Nikasil “Extremely Low Kickback”
MAX ENGINE SPEED: No load…13,500 RPM
HORSEPOWER: 5.67hp (DIN) CUTTING CHAIN L
UBRICATION SYSTEM
TYPE: Fully automatic, adjustable
IGNITION SYSTEM
DRIVE SYSTEM: Geared to Centrifugal Clutch
TYPE: Electronic, one piece modular, CD LUBRICANT: Cutters Edge “High Tack” Bar & Chain Oil
BRAND: FHP or High Quality Bar & Chain Oil
SPARK PLUG: Champion CJ7Y or equivalent OIL TANK CAPACITY: 14.24 fl.oz. (0.42 liters)
GAP: 0.020 in. (0.5mm)
HANDLES
STARTING SYSTEM TYPE: Front/Top…Full Wrap
ONE STEP STARTING SYSTEM WITH (For ease of use with gloves, from either side of saw)
COMPRESSION RELEASE Rubber coated for sure grip
Comprised of… Rear…Flared base for kickback guard. Full isolation anti-
Momentary contact switch vibration
Combined choke/throttle lock with
Throttle safety guard VIBRA
TION LEVELS
*FRONT HANDLE m/s
2
: Idling 3.4
AIR FIL
TRATION
Racing 2.2
SYSTEM: “RAM-AIR INDUCTION” *REAR HANDLE m/s
2
: Idling 1.8
TYPE: 4-stage external mount with oil tack barrier Racing 3.8
SURFACE AREA: 211.4 sq.in. effective filtration surface area (*see Note 2)
MICRON RATING: <1 Micron
SILENCING
MUFFLER: Oversize, top ported, low restriction with fire screen
**NOISE LEVEL: 104dB(A) at maximum output
(**see Note1)
FUEL & ENGINE L
UBRICATION
GASOLINE OCTANE RATING: Use 87 octane or higher GU
ARD/DEFLECTOR
FUEL MIX RATIO: TYPE: Aluminum front mount to cover muffler and control air-
With Cutters Edge Synthetic Oil…...100:1 flow for delivery of cleaner, cooler air to cylinder heat
If petroleum base 2-cycle oil used: ...50:1 exchangers…(Keeps engine running cooler and reduces
FUEL TANK CAPACITY: 26.8 fl.oz. (0.77 liters) maintenance)
CARBURET
OR ISOLATION CHAIN BRAKE
Designed to eliminate Vapor-lock and TYPE: Inertia Activated
Vibration STYLE: Free-Swinging Pendulum
TYPE: Air gap isolation and Bakeolite insulation BREAKING TIME: <0.20 second
Pressurized carburetor compartment keeps
out dirt GU
ARD/DEPTH GAUGE (Optional)
(No tools needed for installation, adjustments or removal)
DRIVE SYSTEM
FUNCTION: Covers all the cutting chain, allows saw operator to set
TYPE: Inboard, 3-shoe centrifugal clutch depth of cut to avoid cutting structural members
STYLE: Rim & Drum System MATERIAL: Anodized aluminum
Radially ported to keep rim free of tar & TYPE: D6 for 16” saw… D8 for 20” saw… 3 point
debris buildup… free floating to keep chain mount, positive lock with depth of cut scale
in perfect alignment with bar groove DEPTH OF CUT: D6 = 6” D8 = 8”
SIZE: .404 x 8 TOOTH
CHAIN SPEED: No load chain speed 121.6 FPS WEIGHTS
(feet per second) POWERHEAD ONLY: 15.25 lbs (Dry Weight)
CE-2171RS-12”: 18 lbs
GUIDE BAR
CE-2171RS-16”: 18.5 lbs
TYPE: Solid one piece construction CE-2171RS-20”: 19.3 lbs
10 Tooth Sprocketnose CE-2171RS/D6: 20.6 lbs
20” and 16” slotted for Guard/Depth Gauge CE-2171RS/D8: 21.65 lbs
MA
TERIAL STANDARD ACCESSORIES
HIGH ALLOY: 192” Thick Bar Body ACCESSORIES INCLUDED WITH ALL FIRE RESCUE SAWS…
HIGH SPEED STEEL: Sprocketnose “Scrench” holder and “Scrench” tool, complete tool kit including grease gun and
CUTTING LENGTHS: 20” 16” and 12” packet of grease, complete manuals, filter oil, Cutters Edge 2-cycle oil mix,
SIZE: 404 Pitch .063 Gauge Cutters Edge bar & chain oil, bar scabbard (saws without D6 & D8 only)
**Note 1: Equivalent noise level is, according to ISO 7182 and ISO *Note 2: Equivalent vibration level is, according to ISO 7505, calculated as the
9207 calculated as the time-weighted energy total for noise levels time-weighted energy total for vibration levels under various working conditions
under various working conditions with the following time distribution: with the following time distribution: idle, full speed.
1/3 idle, 1/3 full load, 1/3 full speed.
CUTTERS EDGE
®
, D8 Guard/Depth Gauge
®
and BULLET
®
Chain are registered trademarks of Edge Industries Inc. Pat 5,056,395 5,156,156