Specifications
CUTTERS EDGE FIRE RESCUE SAWS/20
CUTTERS EDGE FIRE RESCUE SAW SPECIFICA
TIONS..MODEL #CE-2165-RS
ENGINE CUTTING CHAIN
TYPE: Single-cylinder 2-cycle, with loop scavenging STYLE: CUTTERS EDGE BULLET® CHAIN
DISPLACEMENT: 4.0 cu. in. (65.1cc) TYPE: Carbide Tipped with “Locking Key”
BORE: 1.89 in. (48mm) and Solid Bullet Raker Gauge
STROKE: 1.4 in (36mm) DESIGN: Patented Fire Rescue Design…U.S. Patent No. 5,056,395
COMPRESSION RATIO:
9.4:1 SIZE: .404”Pitch x .063” Gauge
BEARINGS: Heavy-duty deep-groove ball bearings on with .068 “Drive Links (coined to .063”)
crankshaft, needle cage bearings on Heavy Duty Tie Straps, Tempered Rivets and .068”Hubs
connecting rod, piston pin and clutch CERTIFICATION: Meets or exceeds ANSI and OSHA standards
CYLINDER/PISTON: Open ported single ring design, Certified according to ISO 9518 Standards as
with four transfer ports “Extremely Low Kickback”
CYLINDER MATERIAL:
Nikasil
MAX ENGINE SPEED:
No load…12,500 RPM CUTTING CHAIN LUBRICATION SYSTEM
HORSEPOWER: 5.06hp (DIN) TYPE: Fully automatic, adjustable
DRIVE SYSTEM: Geared to Centrifugal Clutch
IGNITION SYSTEM LUBRICANT: Cutters Edge “High Tack” Bar & Chain Oil
TYPE: Electronic, one piece modular, CD or High Quality Bar & Chain Oil
BRAND: FHP
OIL TANK CAPACITY
:14.24 fl.oz. (0.42 liters)
SPARK PLUG: Champion CJ7Y or equivalent
GAP: 0.020 in. (0.5mm) HANDLES
TYPE: Front/Top…Full Wrap
STARTING SYSTEM (For ease of use with gloves, from either side of saw)
ONE STEP STARTING SYSTEM WITH Rubber coated for sure grip
COMPRESSION RELEASE Rear…Flared base for kickback guard. Full isolation
Comprised of… anti-vibration
Momentary contact switch
Combined choke/throttle lock with VIBRATION LEVELS
Throttle safety guard *FRONT HANDLE m/s
2
: Idling 3.1
Racing 2.6
AIR FILTRATION *REAR HANDLE m/s
2
: Idling 1.8
SYSTEM: “RAM-AIR INDUCTION” Racing 3.8
4-stage external mount with oil tack barrier
SILENCING MUFFLER:
SURFACE AREA: 211.4 sq.in.effective filtration surface area Oversize, top ported, low restriction with fire screen
MICRON RATING: <1 Micron **NOISE LEVEL: 104dB(A) at maximum output
(**see Note1)
FUEL & ENGINE LUBRICATION GUARD/DEFLECTOR
GASOLINE OCTANE RATING: Use 87 octane or higher TYPE: Aluminum front mount to cover muffler and control air-
FUEL MIX RATIO: flow for delivery of cleaner, cooler air to cylinder heat
With Cutters Edge Synthetic Oil…...100:1 exchangers…(Keeps engine running cooler and reduces
If petroleum base 2-cycle oil used: ...50:1 maintenance)
FUEL TANK CAPACITY:
26.8 fl.oz. (0.77 liters)
CHAIN BRAKE
CARBURETOR ISOLATION TYPE: Inertia Activated
Designed to eliminate Vapor-lock and STYLE: Free-Swinging Pendulum
Vibration BREAKING TIME: <0.20 second
TYPE: Air gap isolation and Bakeolite insulation
Pressurized carburetor compartment keeps GUARD/DEPTH GAUGE (Optional)
out dirt (No tools needed for installation, adjustments or removal)
FUNCTION: Covers all the cutting chain, allows saw operator to set
DRIVE SYSTEM depth of cut to avoid cutting structural members
TYPE: Inboard, 3-shoe centrifugal clutch MATERIAL: Anodized aluminum
STYLE: Rim & Drum System TYPE: D6 for 16” saw… D8 for 20” saw… 3 point mount, positive
Radially ported to keep rim free of tar & lock with depth of cut scale
debris buildup… free floating to keep chain DEPTH OF CUT: D6 = 6” D8 = 8”
in perfect alignment with bar groove
SIZE: .404 x 7 TOOTH WEIGHTS
CHAIN SPEED: No load chain speed 98.5FPS POWERHEAD ONLY:15.25 lbs (Dry Weight)
(feet per second) CE-2165RS-12”: 18 lbs
CE-2165RS-16”: 18.5 lbs
GUIDE BAR CE-2165RS-20”: 19.3 lbs
TYPE: Solid one piece construction CE-2165RS/D6: 20.6 lbs
10 Tooth Sprocketnose CE-2165RS/D8: 21.65 lbs
20” and 16” slotted for Guard/Depth Gauge
MATERIAL STANDARD ACCESSORIES
HIGH ALLOY: .192” Thick, Bar Body ACCESSORIES INCLUDED WITH ALL FIRE RESCUE SAWS…
HIGH SPEED STEEL:
Sprocketnose “Scrench” holder and “Scrench” tool, complete tool kit including grease gun and
CUTTING LENGTHS:
20” 16” and 12” packet of grease, complete manuals, filter oil, Cutters Edge 2-cycle oil mix,
SIZE: 404 Pitch .063 Gauge Cutters Edge bar & chain oil, bar scabbard (saws without D6 & D8 only)
**Note 1: Equivalent noise level is, according to ISO 7182 and ISO *Note 2: Equivalent vibration level is, according to ISO 7505, calculated as the
9207 calculated as the time-weighted energy total for noise levels time-weighted energy total for vibration levels under various working conditions
under various working conditions with the following time distribution: with the following time distribution: idle, full speed.
1/3 idle, 1/3 full load, 1/3 full speed.
CUTTERS EDGE
®
, D8 Guard/Depth Gauge
®
and BULLET
®
Chain are registered trademarks of Edge Industries Inc. Pat 5,056,395 5,156,156