Technical information

Nikon D200, D2HS, D2X and D2XS and Fuji S5 Pro are registered
trademarks or a trademark of their respective companies.
GeoPic II user settings
15
GeoPic II user settings
The GeoPic II has a total of eight user settings, each
with different options that can be configured to suit your
needs. The settings menu is accessed from any mode
by holding the shutter release button half way and
pressing the function button on the GeoPic II for around
5 seconds. As the settings menu is entered, the status
light flashes white twice.
Navigating the setting and option menus is achieved by
using the function button and the shutter release button:
When in settings menu: When in options menu:
Half press
shutter
release
Changes to the next setting
(wraps around from the last
to the first setting)
Changes to the next option
(wraps around from the last to
the first option)
Function
button
Enters the option menu for
the current setting. This is
confirmed by a single
red/green flash
corresponding to the first
option for this setting.
Saves the current option to
memory. This is confirmed by
a beep and a number of
green flashes corresponding
to the option number.
Full press
shutter
release
Exits the settings menu and
returns to normal operation.
This is confirmed by two
white flashes.
Exits the option menu and
returns to the settings menu.
This is confirmed by a number
of blue flashes corresponding
to the setting number.
Status
light
A number of blue flashes
corresponding to the setting
number.
A number of flashes
corresponding to the option
number. Flash colour will be
green if option is currently in
use or red otherwise.
The eight settings and options for these settings are as
follows (default option is green):