Installation Instructions

FREQUENTLY ASKED QUESTIONS
LIMITED WARRANTY
TM
How should laminate countertops be stored prior to installation?
Whenever possible, store your countertops horizontally as flat as possible. Try to keep them in a warm/dry area
and after dry fitting the pieces (laying out together and inspecting), put the pieces back in their protective
packaging until installation. Avoid storing countertops in garages or basements.
Can laminate countertops be used as a cutting boards or have hot utensils laid on them?
While contemporary laminates do have durable finishes, you should not cut directly on their surface or lay any
utensils warmer than approximately 250 degree F on your countertops.
Are build-up strips necessary for installation in every instance?
Yes. Our countertops are 3/4” thick with a 3/4” build-down front edge. If you were not to use build-up strips, your
front edge would hang down over cabinet drawers or doors. Build-up strips also provide support for your tops
and attachment points from cabinets to tops.
If my walls are out of square, do I need my countertops to be cut out of square as well?
If your walls are 1/2” or less out of square, simply sanding the scribe or back of the countertop to the contour of
your walls will provide a snug fit. If your walls are more out of square, it may be necessary for you to use loose, set
on backsplash to cover the gap between the back of the tops and the wall.
Q
A
Q
A
Q
A
Q
A
4
If there were any problems with the packaging,
transport, or final condition of the products
delivered, please contact us at:
[e-mail] /
[e-mail] /
1-800-243-8514
1-800-243-8514
The manufacturer warrants to the original purchaser only, that this countertop is free of defects in workmanship and
material for a period of one (1) year period, the manufacturer, at its sole discretion, agrees to repair or replace the defetive
product. If the product must be replaced, the manufacturer will send the replacement product to the store where the
product was purchased. The original purchaser will then, at their own expense, pick up the replacement product. The
original purchaser must also return the defective product to the store where it was purchased, at the original sole expense.
This limited warranty does not cover any labor for the replacement of any defective product.
This limited warranty does not cover any damage that has resulted from abuse or misuse of the product.
This limited warranty does not cover any miters or field joints where there was improper gluing when joints were assembled.
The rights under this limited warranty are limited to the original purchaser and may not be transferred to subsequent
owners. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Sellers shall not be liable for
any special, incidental or consequential damages. THIS SOLE AND EXCLUSIVE REMEDY AGAINST SELLER WILL BE
FOR THE REPLACEMENT OF ANY DEFECTS as provided herein. As long as the seller is willing or able to repair or replace
the defective product, as provided above, THIS EXCLUSIVE REMEDY shall not be deemed to have failed of its essential purpose.