User`s manual

2-3
CFT-A
The wedge can send alpha characters as either upper case or lower case. Default is lower
case. This does not apply to full ASCII codes, such as Extended Code 39 or Code 128.
The number keys option controls whether the wedge sends numbers as the keys on the top
row of the keyboard (Default), or as the keypad keys. Some programs are designed to
receive numeric input only from the keypad. Note: The Num Lock must be enabled if the
keypad is used.
Upper Lower
Keyboard Keypad
The speed at which the barcode data is sent to the keyboard port can be changed. By
default, data is sent at the fastest rate. The rate can be slowed using the codes below.
Scan the START code on Page 2, one of the codes below, then the END code on Page 2.
Slow Slowest
Fastest (Default) Fast Medium