User`s manual

START

END

ABORT

SET

2-4

CFT-A

END

START

BORT

SET

RS-232 Parameters

To set the Scanner to RS-232 communications, scan the code below. Note that in order for

the scanner to function in this mode it must be equipped with the RS-232 cable and will

also require an external power supply. To return to the keyboard wedge mode, scan the

“Return to Wedge” code below.

After Selecting RS-232, select the desired baud rate. Note that the default communications

parameters are: 9600 baud, 8 data bits, No Parity, 1 Stop Bit.

Select the number of data bits. Both 7 and 8 bit data words are available.

Select parity from the choices below. Normally No parity is used with an 8 bit data word.

Mark, Space, Even or Odd parity is selected for a seven dit data word.

RS-232 Return to Wedge

7 Bit Word 8 Bit Word (Default)

No Parity (Default) Even Parity Odd Parity

2400 baud1200 baud 4800 baud

9600 baud 19200 baud 38400 baud