Technical data

Safety Instructions and Warranty Terms 22
Manual econ sens+ Version 1.40
General information on saving settings
The overall configuration procedure for the econ sens+ is spread over several menus and various
input windows.
On every menu page there is an Accept button. This is used to save your inputs on the respective
menu page, i.e. if you change the menu page and forget to press Accept, your inputs will revert to the
default values.
In order to permanently save your settings at the end of the overall configuration procedure, select
Store changes in permanent memory in the Save menu and confirm with Accept.
On every menu page you will be reminded to permanently save your settings with the message
“Remember to save your changes permanently”.
Time/Date submenu
Time/Date submenu is used to configure the time and date settings of the econ sens+.
The following options are available:
1. Time setting using NTP time server
If the econ sens+ is in a network in which a time server with NTP protocol is available, the device can
adopt the time and date from this server. To do this, activate the Adopt time and date from time server
select box.
You can define up to four ntp time servers. To do this enter the IP addresses or names of the
respective servers in the fields adjoining ntp time servers 1..4, e.g.
ptbtime1.ptb.de or 192.53.103.108
Figure 24: Time/Date submenu