Technical data

Safety Instructions and Warranty Terms 14
Manual econ sens+ Version 1.40
Figure 15: Internet protocol properties
1. Under “Start / Control Panel / Network and Internet Connections / Network Connections” double-
click the LAN connection of the network interface card connected to the network.
2. Click the “Properties” button.
3. Select “Internet protocol (TCP/IP)” from the list and click on “Properties”.
4. Activate the options “Use the following IP
address” and “Use the following DNS server
addresses”.
5. Enter the parameters shown in Fig. 10 and
confirm with “OK”.
When the above IP address is entered in the
web browser, the econ-sens+ homepage
should appear.
The settings for Windows 7 are performed in the Network and Sharing Center.
Accessing the web interface in a network with a DHCP server
If the econ sens+ is located in a network in which there is a DHCP server available for automatic
address assignment, it automatically adopts the address assigned to it by this server. You can identify
which address the econ sens+ has been given in the DHCP Server.