CSS-5930BT AM/FM/WB/CD/MP3/WMA/Bluetooth, 4-CHANNEL, Public Address Capability Custom Radio Corp 4012 Merchant Rd. Fort Wayne, IN Tel : 260-489-2062 www.customradio.
Table of Contents Table of Contents --------------------------------------------------------------------------------------------------------------------------------- 1 General Features ---------------------------------------------------------------------------------------------------------------------------------- 2 Car Audio Wiring Configuration --------------------------------------------------------------------------------------------------------------- 3 Identification of Controls and Functions --------
Specifications & Performance General Features This AM/FM/WB/CD/MP3/WMA/Bluetooth car audio unit is equipped with the following features. 1. Radio unit (Tuner) - Electronic station search - Memory function which you can store 15 FM Stations and 10 AM stations in Memory. - 7 WB (Weather Band) Stations - A.PS (Auto Preset-Store) system selects and memorizes the stations automatically in order of good reception. 2.
Car Audio Wiring Configuration Tips for Handling the Discs & CD Error Messages 1. Connection diagrams Please refer below for vehicle's audio connector wiring configuration...
Radio Reception STRONG SIGNAL NOISE Identification of Controls and Functions STATION DRIFT NOISE 1 Strong Signal Noise may occur when you are very close to a When a vehicle reaches an area where there are two strong Transmitter Tower. The broadcast signals are extremely stations broadcasting at similar frequencies, the original station strong which causes noise and sound break-up at the radio may lose it's reception and the second station will be receiver. broadcasted.
Radio Reception General Operation 1 3-2. Long push SEL to enter the 2nd menu which allows to adjust BEEP, I-VOL, BT VOL, AREA, ILLUM, BT MIC F/R. 2 long VOL push BEEP short push short short I-VOL push BT R MIC VOL BT VOL push short push AREA BT R H/L short push BT F MIC VOL short push short push BT R MIC short push Turn VOL BT F MIC - BEEP: BEEP ON / BEEP 2ND. 1. POWER/MODE Button - Simply press it for the first time to turn the unit ON.
Radio Reception General Operation Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. MULTI-PATH NOISE Since FM signals can be reflected by obstructions, it's possible to Unlike AM signals, FM signals cannot travel beyond the horizon. receive both the direct signal and the reflected signal at the same Therefore, FM stations cannot be received at great distances time.
Radio Reception Radio Operation 7 8 9 10 11 12 13 14 15 3 16 1. BAND Button Each time you press this button, LCD displays as follows: FM1 --> FM2 --> FM3 --> AM1 --> AM2. 2. T/F (time/frequency) Display Button Simply press T/F button to display current frequency. It will revert to time display after approximately 6 seconds. 3. MANUAL TUNE UP/DOWN Knob To manually tune to a radio station, simply turn TUNE knob left or right to increase or decrease the radio frequency. 4.
Compact Disc Operation AUX INPUT Operation & Public Address (PA) - PUBLIC ADDRESS (PA) - The Radio is equipped with two microphone inputs for public address purposes. 18 AUX INPUT It is possible to connect your portable media player to the unit for playback of the audio tracks via the car spearers. To get the best results when connecting the portable media to the unit, follow steps: - Use a 3.5mm stereo plug cable to connect the media player headphone socket to AUX Jack.
USB Operation Bluetooth Operation 18 17 1. USB Playback Get to USB mode, press MODE button (1) momentarily or gently insert the USB driver or USB device. It will play the audio files in the USB device automatically and show USB READ on the LCD display. No files or wrong file (text file) in USB device, it will be converted back to the previous mode after display NO FILE. 2. USB Function All of the USB file playback functions are the same as MP3 disc function.
Bluetooth Operation Bluetooth Operation 5. Bluetooth Connection and Disconnection 1) When established Bluetooth connection between this unit and the Cellular Phone, Bluetooth Icon on the display appears. 2) To disconnect Bluetooth Link Press CALL END button for about 2s, it shows DISCONN and disappears Bluetooth Icon on the display. 3) To connect Bluetooth Link Simply press CALL button, it blinks Bluetooth Icon on the display while Bluetooth is being connected.
