User manual

3. PRINTER FUNCTIONS
3-16
DPT100-B
n$SGn$SG
n$SG
n$SGn$SG
[Name] Set absolute shift into a graphic line.
[Format] ASCII GS $ n
Hex 1D 24 n
Decimal 29 36 n
[Range] 0≤ n ≤ 47
[Description] Set the print beginning position into a graphic line based on
the current value of n that indicate the byte number of shift
from left margin.
[Notes] • Settings outside the specified printable area are ignored.
[Default]
[Reference]
[Example]
nISGnISG
nISG
nISGnISG
[Name] Transmit printer ID.
[Format] ASCII GS I n
Hex 1D 49 n
Decimal 29 73 n
[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51
[Description] Transmits the printer ID specified by n follows:
DIretnirPDIretnirP
DIretnirP
DIretnirPDIretnirPnoitacificepS
94,1DIledomretnirPH05
05,2desutoNffOotdexiF
15,3DInoisrevMOR)retcarahc4(noisrevMORnosdnepeD
[Notes] • This command is executed when the data is processed in
the data buffer. Therefore, there could be a time lag between
command reception and data transmission, depending on
data buffer status.
[Default]
[Reference]
[Example]