User manual

3. PRINTER FUNCTIONS
3-15
DPT100-B
n1 specifies the starting dot line ( 1 ÷ 85 ).
n2 specifies the number of lines to print.
[Notes] • If n1 + n2 > 85 the printer only prints 85 - n1 + 1 dotlines.
[Default]
[Reference]
[Example] To print the graphic bank from dotline 10 to dotline 40, send:
1BH FAH 0AH 1EH
vCSEvCSE
vCSE
vCSEvCSE
[Name] Transmit paper sensor status
[Format] ASCII ESC v
Hex 1B 76
Decimal 27 118
[Description] When this command is received, transmit the current status
of the paper sensor.
[Notes] • This command is executed immediately, even when the
data buffer is full (Busy ).
The status to be transmitted is shown in the table below:
tiBnO/ffOxeHlamiceD
noitcnuF
01,
ffO000
tneserprepap,esolcrevoC
nO03 3
rosnesrepaproneporevoC
gnikrowton
3,2
ffO000
:rosnesdne-repaP
tneserprepaP
nOC021
:rosnesdne-repaP
tneserptonrepaP
4ffO000
.ffOotdexiF.desutoN
5
ffO000
tcerrocerutarepmetdaeH
nO0223
rorreerutarepmetdaeH
6
ffO000
tcerrocegatlovyrettaB
nO0446
rorreegatlovyrettaB
7ffO000
.ffOotdexiF.desutoN
[Default]
[Reference]
[Example]