User manual

3. PRINTER FUNCTIONS
3-8
DPT100-B
• After the command execution the printer ignores all the
characters received from the communication port until to the
next ESC STX reception.
• After receiving this command the infrared led is functioning,
as usual.
[Default]
[Reference] ESC (STX)
[Example]
n#CSEn#CSE
n#CSE
n#CSEn#CSE
[Name] Transmit printer ID
[Format] ASCII ESC # n
Hex 1B 23 n
Decimal 27 73 n
[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51
[Description] Transmits the printer ID specified by n follows:
DIretnirPDIretnirP
DIretnirP
DIretnirPDIretnirPnoitacificepS
94,1DIledomretnirPH05
05,2desutoNffOotdexiF
15,3DInoisrevMOR)retcarahc4(noisrevMORnosdnepeD
[Notes] • This command is executed when the data is processed in
the data buffer. Therefore, there could be a time lag between
command reception and data transmission, depending on
data buffer status.
[Default]
[Reference]
[Example]