User manual

3. PRINTER FUNCTIONS
3-6
DPT100-B
HF0HF0
HF0
HF0HF0
[Name] Set CRLF mode
[Format] ASCII -
Hex 0F
Decimal 15
[Description] Inhibits the command $0D maintaining enabled only the
command $0A for printing
[Notes] • To disable this option, reset the printer
• This command clears the line buffer
• On switching on the default value is in the Option Register
[Default] Setting in the option register by means of the front keys
[Reference] 0DH
[Example]
H11H11
H11
H11H11
[Name] Graphic mode
[Format] ASCII -
Hex 11
Decimal 17
[Description] Enables graphic mode:
a line in 24 column mode corresponds to 144 horizontal dots
divided into 24 blocks of 6 dots each; a line in 40 column
mode corresponds to 240 horizontal dots divided into 40
blocks of 6 dots each.
[Notes] To obtain graphic printing, enter the command $11 at the
beginning of each line. The format of the byte in graphic
configuration is:
X R P6 P5 P4 P3 P2 P1
D7 D6 D5 D4 D3 D2 D1 D0
where:
X is not used (0 is recommended);
R must be fixed at level 1;
P1,.P6 are the graphic dot data (1 prints, 0 does not print).
The P6 bit of the string of dots transmitted is printed on the
left and the others follow from left to right (P5, P4, P3, P2,