User manual

1. INSTALLATION AND USE

11-

DPT100-B

DC IN

1.1 CONNECTIONS

1.1.1 Battery Recharger

For the Battery Recharger/Power Supply and serial connection, the printer is

equipped with a connecting cable (fig. 1.2) that comes packed with the

printer and has a double connection system. On one side is a 9-pin female

connector (fig. 1.2.A) for the serial port; on the other side of the same

connector is a RJ11 connector (fig. 1.2.B) and a jack (fig. 1.2.C) for

connection to the battery recharger.

The printer is equipped with a rechargeable battery pack, located in the

battery compartment (2), self-sufficient for printing. To recharge the

batteries, use the connection cable (fig. 1.2) that comes packed with the

printer and following the instructions reported in the 1.2.1 paragraph.

(Fig.1.2.A)

(Fig.1.1)

(Fig.1.2.C)

(Fig.1.2.B)