User manual

3. PRINTER FUNCTIONS
3-16
DPT100-S
nd...1dnWSGnd...1dnWSG
nd...1dnWSG
nd...1dnWSGnd...1dnWSG
[Name] Prints n byte of a 200 dpi graphic line
[Format] ASCII GS W n d1... dn
Hex 1D 57 n d1... dn
Decimal 29 87 n d1... dn
[Range] 1 ≤ n ≤ 48
0 ≤ d1 … dn ≤ 255
[Description] Print n byte of a 200 dpi graphic line where :
• n specifies the number of byte to print;
• d1...dn specify the bytes to print.
[Notes] • If the bit image data input exceeds the number of dots to be
printed on a line, the excess data are processed as printable
characters.
• d indicates the bit image data. Set a corresponding bit to 1
to print a dot, or to 0 to not print the dot.
• This command is not affected by the emphasized, double-
strike, underline (etc.) print modes, except for the upside-
down mode.
[Default]
[Reference]
[Example] For printing 12 bytes the command sequence is :
1D 57 0C FF 00 FF 00 FF 00 FF 00 FF 00 FF 00