User manual

3. PRINTER FUNCTIONS
3-13
DPT100-S
sCSEsCSE
sCSE
sCSEsCSE
[Name] Transmits the next character in serial
[Format] ASCII ESC s
Hex 1B 73
Decimal 27 115
[Description] Transmits the next character it receives on the serial port
[Notes]
[Default]
[Reference]
[Example] If you transmit: ESC s A
the last character, A, will not be printed but immediately trans-
mitted on the serial line
2n1n·CSE2n1n·CSE
2n1n·CSE
2n1n·CSE2n1n·CSE
[Name] Print graphic bank ( 384 ´ 85 dots).
[Format] ASCII ESC · n1 n2
Hex 1B FA n1 n2
Decimal 27 250 n1 n2
[Range] 0 £ n1, n2 £ 255
[Description] Prints the graphics bank from flash.
n1 specifies the starting dot line ( 1 ÷ 85 ).
n2 specifies the number of lines to print.
[Notes] • If n1 + n2 > 85 the printer only prints 85 - n1 + 1 dotlines.
[Default]
[Reference]
[Example] To print the graphic bank from dotline 10 to dotline 40, send:
1BH FAH 0AH 1EH
vCSEvCSE
vCSE
vCSEvCSE
[Name] Transmit paper sensor status
[Format] ASCII ESC v
Hex 1B 76
Decimal 27 118
[Description] When this command is received, transmit the current status
of the paper sensor.
[Notes] • This command is executed immediately, even when the