User manual

3. PRINTER FUNCTIONS
3-10
DPT100-S
RCSERCSE
RCSE
RCSERCSE
[Name] Set reverse mode printing
[Format] ASCII ESC R
Hex 1B 52
Decimal 27 82
[Description] Selects printing in reverse mode: the receipt feeds out of hte
printer with the printing in normal mode running from left to
right.
[Notes]
[Default] Setting in option register by means of front keys
[Reference] ESC N
[Example]
WCSEWCSE
WCSE
WCSEWCSE
[Name] Prints a graphic line at 200 dpi
[Format] ASCII ESC W
Hex 1B 57
Decimal 27 87
[Description] After receiving this command, the printer waits for 48 bytes
which correspond to an entire graphic line. In fact, 48 bytes
of 8 bits each correspond to 384 dots per line.
[Notes]
[Default]
[Reference]
[Example]
aCSE)dd(aCSE)dd(
aCSE)dd(
aCSE)dd(aCSE)dd(
[Name] Selects the number of dot spaces
[Format] ASCII (dd) ESC a
Hex (dd) 1B 61
Decimal (dd) 27 97
[Description] (dd) are two ASCII characters which identify a hexadecimal
byte and correspond to the number of dot lines between one
print line and another
[Notes]