User manual

3. PRINTER FUNCTIONS
3-8
DPT100-S
@CSE@CSE
@CSE
@CSE@CSE
[Name] Resets the printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Cancels all the data in the print buffer and resets the printer
mode, restoring the mode which was enabled at the moment
of switching on
[Notes] • Same as hardware reset
• After the command has been transmitted, 1.5 seconds
elapse before the printer is enabled
[Default]
[Reference]
[Example] This can be useful during switching on in order to avoid the
sending of false characters during initialization by the master
device
]Ln[]Hn[ACSE]Ln[]Hn[ACSE
]Ln[]Hn[ACSE
]Ln[]Hn[ACSE]Ln[]Hn[ACSE
[Name] Executes [n] dots line feed
[Format] ASCII ESC A nH nL
Hex 1B 41 nH nL
Decimal 27 65 nH nL
[Description] Executes [n] dots line feed.
[Notes]
[Default]
[Reference]
[Example]
MCSE)dd(MCSE)dd(
MCSE)dd(
MCSE)dd(MCSE)dd(
[Name] Writes the value (dd) in the print mode
[Format] ASCII dH dL ESC M
Hex dH dL 1B 4D
Decimal dH dL 27 77
[Description] Sets the print mode default parameters:
$00 small character printing