User manual

1. INSTALLATION AND USE

31-

DPT100-S

1.2 CONFIGURATION

The printer set up print out (see fig. 1.4) includes a range of information, and

among these should be pointed out.

The printer’s configurable

(1)

parameters are:

• Baud Rate: 38400, 19200, 9600

, 4800, 2400, 1200, 600.

• Data length: 7, 8

bits/car.

• Parity: None

, even or odd.

• Handshaking: XON/XOFF

or Hardware.

• Autofeed: CR deactivated

or CR activated.

• Consumption: Low power, High power

(2)

• Print density: -2, -1, 0

, +1, +2.

Please note: the parameters marked with the symbol

represent the default

values.

(1)

Note: the printer interface is fixed setted to RS232.

(2)

Note: this parameter regulates the type of power supply setting; the default value

is High power. For further details please refers to the 1.2.1 section.

(Fig.1.4)

* SETUP DEFAULT *

HEAD TEMP. [°C] = 22.5

BATT TEMP. [°C] = 25.0

HEAD VOLT [V] = 6.3

Interface :RS232

Baud Rate : 9600 bps

Data length : 8 bits/chr

Parity : None

Handshaking : Xon/Xoff

Autofeed : CR disabled

Consumption : High power

Print Density : 0

[PUSH] ENTER SET-UP

[FAST PUSH] EXIT SET-UP