User manual

3. PRINTER FUNCTIONS
3-8
DPT100-B/I/BT
devices ( for example mobile phone), which allow PINs entered, will not support
alphanumeric entry, devices sold with fixed PINs should be sold with a note of the PIN
given as decimal digits.
[Default]
[Reference]
[Example] • To reads the BT Name assigned to the printer send the following command :
The printer’s answer is as follows (if BT Name is S’print BT) :
Printer $06 $0B $53 $27 70 $72 $69 $6E $74 $2D $42 $54 $00
[ASCII] ACK 11 S ‘ p r i n t - B T Null
• To set the printer’s BT PIN parameter to ‘5678’ send the following command :
Host $1B $42 $02 $05 $35 $36 $37 $38 $00
[ASCII]ESCBmn5678Null
The printer’s answer is as follows :
Printer $06
[ASCII] ACK
D4$B1$)dd(
[Name] Writes the value (dd) in the print mode
[Format] ASCII dH dL ESC M
Hex dH dL 1B 4D
Decimal dH dL 27 77
[Description] Sets the print mode default parameters:
$00 small character printing
$01 double width printing
$02 double height printing
$03 expanded printing
[Notes] • The setting is stored in the EEPROM
[Default] Setting by means of the front keys
[Reference] $1B $6D
[Example] For small character printing, transmit:
$30 $30 $1B $4D
For double height printing, transmit:
$30 $32 $1B $4D
E4$B1$
[Name] Set normal mode printing
[Format] ASCII ESC N
Hex 1B 4E
Decimal 27 78
[Description] Select normal mode printing:the receipt feeds out of the printer with the printing upside
down running from right to left
[Notes]
[Default] Setting in option register by means of front keys
[Reference] $1B $52