User manual

3. PRINTER FUNCTIONS
3-1
DPT100-B/I/BT
(Tab.3.1)
XEH.moCIICSA.moCnoitpircseD
00$LUNsretcarahcllamsnistnirP
10$HOShtdiwelbuodnistnirP
20$XTSthgiehelbuodnistnirP
30$XTEgnitnirpdednapxE
40$TOEgnitnirpretcarahcllamsserotseR
70$LEBreffubatadtnirplecnaC
A0$FLenilenosdeefdrawroF
)n(B0$TVenil)n(sdeefdrawroF
D0$RCreffubenilstnirP
F0$ISedomFLRCsteS
11$1CDedomcihparG
20$B1$)XTS(CSEtropderarfnielbanE
30$B1$)XTE(CSEtropderarfnihtiwnoitacinummocehtnwodesolC
n32$B1$n#CSEDIretnirptimsnarT
03$B1$0CSEfforetnirpehtgninruT
04$B1$@CSEretnirpehtsteseR
14$B1$ACSEdeefenilstod]n[setucexE
nd...0dnm24$B1$nd...0dnmBCSE sretemarapnoitacinummochtooTeulBdaerdnateS
D4$B1$)dd(MCSE)dd(edomtnirpni)dd(eulavsetirW
E4$B1$NCSEgnitnirpedomlamronsteS
15$B1$QCSE.gninilrednuselbanE
25$B1$RCSE.gnitnirpedomesreversteS
75$B1$WCSE.ipd002foenilcihpargtnirP
16$B1$)dd(aCSE)dd(.ecapstodforebmunstceleS
36$B1$cCSE.gnitnirpedocrabfotnemeganaM
D6$B1$mCSE.lairesniedomtnirpstimsnarT
17$B1$qCSE.gninilrednuselbasiD
37$B1$sCSE.lairesniretcarahctxenstimsnarT
67$B1$vCSE.sutatsretnirpstimsnarT
2n1nAF$B1$2n1n}{CSE.cihpargtnirP
n42$D1$n$SG.enilcihpargaotnitfihsetulosbateS
n94$D1$nISG.DIretnirpstimsnarT
55$D1$USG.eulavtluafedotsretemarapretnirpsteseR
3.1 CONTROL CHARACTERS
The command table lists all the commands for the management of the printer functions. These commands can
be transmitted to the printer with the serial interface. The commands can be transmitted to the printer at any
moment, but they will only be carried out when the characters previously transmitted have been printed or the
commands previously transmitted have been carried out. There are no commands with priority status; all the
commands are carried out when the circular buffer is free to do so.
LEGEND :
Symbol Function
$ indicates the representation of the command hexadecimal value (for example $40 means HEX
40).
{ } indicates an ASCII character not performable.
n, m, t, x, y are optional parameters that can have different values.
COMMAND TABLE