User manual

(Tab.4.1)
4.1 TECHNICAL SPECIFICATIONS
Table 4.1 gives the main technical specifi cations for the printer.
Available interfaces Serial RS232 / TTL Parallel Centronics / TTL
Baud rate From 600 to 38400 bps -
Sensors
Head temperature, paper end
OPTIONAL: Cover open sensor
Printing driver Window
TM
2K, XP
Receive buffer 128 Kbytes
Flash memory 32 Mbytes
Emulation CUSTOM
PRINTER SPECIFICATIONS
Print method Thermal, fi xed head
Resolution 203 DPI (8 dot/mm)
Printing mode Straight, 180°
Printing format Normal, width from 1 to 2, bold, reverse, underlined
Character fonts ASCII standard, International
Graphics memory 1 Logo (384 x 85 dots)
Number of columns 24 40
Character matrix 16 x 24 8 x 24
Printing speed
Lines / sec. 13 13
Chars / sec. 307 512
Characters (L x H mm) 2 x 3 1 x 3
PAPER SPECIFICATIONS
Type of paper
Thermal rolls (heat-sensitive side on outside of roll)
LINERLESS paper (see paragraph 1.1.1)
Paper width 57 mm ±0.5 mm
Recommended types of paper from 55 g/m
2
to 70 g/m
2
Internal roll core diameter 13 mm
External roll diameter max. Ø50 mm
Core type Cardboard or plastic
ELECTRICAL SPECIFICATIONS
Power Supply Vcc Vin
PLUS II-S
(2)
, PLUS II-T
(2)
3.5 ÷ 8 V (Range max.) 3.5 ÷ 8 V (Range max.)
PLUS II-S-0004
(2)
- 9 ÷ 48 V (Range max.)
PLUS II-C
(2)
, PLUS II-P
(2)
5 ± 5% 3.5 ÷ 8 V (Range max.)
PLUS II-C
(2)
, PLUS II-P
(2)
- 9 ÷ 48 V (Range max.)
Absorptions (5V)
Medium
(50% Dot ON)
0.2 A (Vcc)
3.3 A (Vin)
Stand by 0.1 A
4. TECHNICAL SPECIFICATIONS
User Manual PLUS II 4-1