User manual

$1B $76
[Name] Transmit paper sensor status.
[Format] ASCII ESC v
Hex 1B 76
Decimal 27 118
[Description] When this command is received, transmit the current status of the paper sensor.
[Notes] • This command is executed immediately, even when the data buffer is full (Busy).
The status to be transmitted is shown in the table below:
Bit Off/On Hex Decimal Function
0,1
Off 00 0 Cover close, paper present.
On 03 3 Cover open or paper sensor not working.
2,3
Off 00 0 Paper-end sensor: paper present.
On 0C 12 Paper-end sensor: paper not present.
4 Off 00 0 Not used. Fixed to Off.
5
Off 00 0 Head temperature correct.
On 20 32 Head temperature error.
6
Off 00 0 Supply voltage correct.
On 40 64 Supply voltage error.
7 Off 00 0 Not used. Fixed to Off.
[Default]
[Reference]
[Example]
$1B $FA n1 n2
[Name] Print graphic bank ( 384 x 85 dots).
[Format] ASCII ESC {} n1 n2
Hex 1B FA n1 n2
Decimal 27 250 n1 n2
[Range] 0 ≤ n1, n2 ≤ 255
[Description] Prints the graphics bank from fl ash.
n1 specifi es the starting dot line (1 ÷ 85).
n2 specifi es the number of lines to print.
[Notes] • If n1 + n2 > 85 the printer only prints 85 - n1 + 1 dotlines.
[Default]
[Reference]
[Example] To print the graphic bank from dotline 10 to dotline 40, send:
$1B $FA $0A $1E
$1D $24 n
[Name] Set absolute shift into a graphic line.
[Format] ASCII GS $ n
Hex 1D 24 n
Decimal 29 36 n
[Range] 0 ≤ n ≤ 47
[Description] Set the print beginning position into a graphic line based on the current value of n that
indicate the byte number of shift from left margin.
[Notes] • Settings outside the specifi ed printable area are ignored.
[Default]
[Reference]
[Example]
3. PRINTER FUNCTIONS
3-12 PLUS II User Manual