User manual

[Notes] • For EAN8 and EAN13 barcodes the check digit is automatic.
• When CODE 39 barcode is used with triple width function, if 6 characters + check digit
are sent the print limits are exceeded, so the barcode can’t be printed.
[Default]
[Reference]
[Example] In the following example is indicated the command sequence to print a barcode:
$1B, ‘N’, $1B, ‘c’, ‘C’, $50, $3C, $14, $04, ‘PLUS’
where:
$1B, ‘N’ (sets the printing in normal mode)
$1B, ‘c’, (bar code printing command)
‘C’, (barcode type = Code 39)
$50, (barcode heigth = 10 mm)
$3C, (starting position = 7,5 mm)
$14, (HRI printing below, barcode width double)
$04, (characters number to print)
‘PLUS’ (characters to print)
$1B $68
[Name] Selects 42 columns.
[Format] ASCII ESC h
Hex 1B 68
Decimal 27 104
[Description] On receiving this command, the printer enters 42-column per line printing mode.
[Notes]
[Default]
[Reference] $1B $49, $1B $69
[Example]
$1B $69
[Name] Selects 40 columns.
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Description] On receiving this command, the printer enters 40-column per line printing mode.
[Notes]
[Default]
[Reference] $1B $49, $1B $68
[Example]
3. PRINTER FUNCTIONS
3-10 PLUS II User Manual