User manual

$1B $23 n
Name] Transmit printer ID.
[Format] ASCII ESC # n
Hex 1B 23 n
Decimal 27 73 n
[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51
[Description] Transmits the printer ID specifi ed by n follows:
n PRINTER ID SPECIFICATION
1, 49 Printer model ID $1B
2, 50 Not used Fixed on $00
3, 51 ROM version ID Dipends on ROM (4 car)
[Notes] • This command is executed when the data is processed in the data buffer. Therefore,
there could be a time lag between command reception and data transmission, depending
on data buffer status.
[Default]
[Reference]
[Example]
$1B $30 (only for PLUSII-S-0004)
[Name] Switch-off the printer.
[Format] ASCII ESC 0
Hex 1B 30
Decimal 27 48
[Description] Switch off the printer and bring it back to low-consumption mode if was disabled the Auto
POWER-ON function (see paragraph 1.3.3).
[Notes] • This command is executed only when the JP8 jumper is open.
[Default]
[Reference]
[Example]
$1B $40
[Name] Resets the printer.
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Cancels all the data in the print buffer and resets the printer mode, restoring the mode
which was enabled at the moment of switching on.
[Notes] • Same as hardware reset.
• After the command has been transmitted, 1.5 seconds elapse before the printer is ena-
bled.
[Default]
[Reference]
[Example]
3. PRINTER FUNCTIONS
3-6 PLUS II User Manual