User manual

$1B $30 ESC 0 Switch off the printer

ONLY FOR PLUSII-S-0004

$1B $40 ESC @ Resets the printer

$1B $41 nH nL ESC A nH nL Executes (n) dots line feed

$1B $49 ESC I Selects 24 columns

(dd) $1B $4D (dd) ESC M Writes value (dd) in print mode

$1B $4E ESC N Set normal mode printing

$1B $51 ESC Q Enable underlining

$1B $52 ESC R Set reverse mode printing

$1B $57 ESC W Print graphic line of 200 dpi

(dd) $1B $61 (dd) ESC a Selects number of dot spaces

$1B $63 ESC c Management of bar code printing

$1B $68 ESC h Selects 42 columns

$1B $69 ESC i Selects 40 columns

$1B $6D ESC m Transmit print mode in serial

$1B $71 ESC q Disable underlining

$1B $73 ESC s Transmits next character in serial

$1B $76 ESC v Transmits printer ID

$1B $FA n1 n2 ESC { } n1 n2 Prints graphic

$1D $24 n GS $ n Set absolutes shift into a graphic line

$1D $49 n GS I n Transmits the printer ID

$1D $55 GS U Resets printer parameters to default value

$1D $57 n d1...dn GS W n d1...dn Print n byte of a 200 dpi graphic line

NOTE: Commands without speciﬁ cations are valid for all the models. All that commands which

provide an answer from the printer are not active for the parallel interface models (PLUSII-C,

PLUSII-P and PLUSII-C-0004).

3. PRINTER FUNCTIONS

3-2 PLUS II User Manual