User manual

1.9.2 Notes about the installation
Fixing to the panel
Fix the printer in the 3 holes as shown in the
scheme (A) (see Fig.1.17), using M3 tapping
screws (n.3).
Fixing back
Fix the printer in the 3 holes as shown in the
scheme (B) (see Fig.1.18), using 3 screws for
plastic d=3 (6 mm usable length).
A
B
NOTE:
The informations provided in this paragraph are corrects for all models.
(Fig.1.17) (Fig.1.18)
1. INSTALLATION AND USE
User Manual PLUS II 1-13