User manual

1.6 SELF-TEST
Printer operating status is indicated in the confi guration print-out in which, next to the name of the components
displayed (see Fig.1.10 and 1.11), the following information is given:
under HEAD TEMPERATURE is given the temperature of the head.
under HEAD VOLTAGE is given the voltage of the head.
PRINTER SETUP
HEAD TEMP. [°C] = 32.5
HEAD VOLT [V] = 5,00
Baud Rate ................. : 38400 bps
Data Length............... : 8 bits/chr
Parity......................... : None
Handshaking ............. : Xon/Xoff
Autofeed .................... : CR Enabled
Columns .................... : 24 col.
Print Mode ................. : Normal
Char Mode................. : Normal
Print Density.............. : 0
[PUSH] key to enter setup
[FAST PUSH] key to exit
PRINTER SETUP
HEAD TEMP. [°C] = 32.5
HEAD VOLT [V] = 5,00
Interface .................... : Centronics
Autofeed .................... : CR Enabled
Columns .................... : 24 col.
Print Mode ................. : Normal
Char Mode................. : Normal
Print Density.............. : 0
[PUSH] key to enter setup
[FAST PUSH] key to exit
RS232 Model Centronics Model
•
•
(Fig.1.10) (Fig.1.11)
1. INSTALLATION AND USE
1-10 PLUS II User Manual